Lightweight Continuous Filament Mat for Enhanced Closed Molding

short description:

CFM985 is exceptionally well-adapted for use in infusion, RTM, S-RIM, and compression molding applications. It offers superior flow properties, functioning effectively both as a reinforcing material and as an intermediary resin distribution layer within fabric reinforcement stacks.

Send email to us

Product Detail

FEATURES & BENEFITS

● Exceptional wettability and flow

● Outstanding laundering durability

● Superior adaptability

● Superior workability and manageability.

PRODUCT CHARACTERISTICS

Product Code	Weight(g)	Max Width (cm)	Solubility in styrene	Bundle density(tex)	Solid content	Resin compatibility	Process
CFM985-225	225	260	low	25	5±2	UP/VE/EP	Infusion/ RTM/ S-RIM
CFM985-300	300	260	low	25	5±2	UP/VE/EP	Infusion/ RTM/ S-RIM
CFM985-450	450	260	low	25	5±2	UP/VE/EP	Infusion/ RTM/ S-RIM
CFM985-600	600	260	low	25	5±2	UP/VE/EP	Infusion/ RTM/ S-RIM

● Other weights available upon request.

● Other widths available upon request.

PACKAGING

● The inner core is available in two diameters: 3 inches (76.2 mm) and 4 inches (102 mm). A minimum wall thickness of 3 mm is maintained across both options to guarantee structural integrity and stability.

● For protection during transportation and storage, every roll and pallet is individually encased in a protective film barrier. This safeguards the products against contamination from dust and moisture, as well as damage from external impacts.

● A unique, traceable barcode is assigned to each roll and pallet. This identifier carries comprehensive production information, such as weight, number of rolls, and manufacturing date, to facilitate precise logistics tracking and inventory control.

STORAGING

● To ensure maintained integrity and performance, it is essential to store CFM in warehouse conditions that are cool and dry.

● Storage Temp: 15°C - 35°C (to avoid degradation)

● To preserve handling characteristics, avoid environments where humidity falls below 35% or exceeds 75%, as this can alter the material's moisture content.

● To prevent compression damage, pallets must not be stacked beyond two layers.

● To guarantee optimal results, the mat should be stored at the job site for no less than 24 hours prior to processing to allow it to adjust to ambient conditions.

● To ensure material consistency, properly close all partially consumed containers using their original sealing mechanism or an approved method to avoid quality deterioration.

Previous: Customizable Continuous Filament Mat for Tailored Closed Molding

Next: Continuous Filament Mat for Efficient Preforming Solutions

Write your message here and send it to us