Fiberglass Yankakken Matsala: Ƙarfafa Ayyukanku ba tare da Kokari ba

Fiberglass Yanke Matsa Matsa: Ƙarfafa Ayyukanku Ba tare da Ƙaƙwalwar Ƙaƙwalwar Hoto ba

taƙaitaccen bayanin:

Chopped Strand Mat wani tabarma mara saƙa ne wanda aka gina shi daga filayen gilashin E-CR. An yi shi da yankakken zaruruwa waɗanda aka daidaita su bazuwar duk da haka ma. Waɗannan yankakken yankakken tsayin millimita 50 ana lulluɓe su da silane mai haɗa haɗin gwiwa kuma an haɗa su ta hanyar emulsion ko foda. Yana aiki da kyau tare da polyester unsaturated, vinyl ester, epoxy, da resin phenolic.

Aika mana imel

Cikakken Bayani

Bayanin Samfura

Yankakken Strand Mat abu ne mara saƙa da aka yi daga filayen gilashin E-CR. Ya ƙunshi yankakken zaruruwa waɗanda aka jera bazuwar amma daidai gwargwado. Wadannan filaye masu tsayin millimita 50 ana lullube su da silane coupling agent kuma ana gudanar da su ta hanyar emulsion ko foda. Ya dace da resins iri-iri, gami da polyester mara kyau, vinyl ester, epoxy, da resin phenolic.

Yankakken Strand Mat yana samun aikace-aikace mai yawa a cikin matakai kamar shimfiɗa hannun hannu, iskan filament, gyare-gyaren matsawa, da ci gaba da laminating. Kasuwannin amfani da shi na ƙarshe sun haɗa da abubuwan more rayuwa da gine-gine, motoci da gini, masana'antar sinadarai, da sassan ruwa. Misalan aikace-aikacensa sun haɗa da kera jiragen ruwa, kayan aikin wanka, sassan mota, bututu masu jure wa sinadarai, tankuna, hasumiya masu sanyaya, fatuna daban-daban, da kayan gini, da sauransu.

Siffofin samfur

Chopped Strand Mat yana ba da kyawawan halaye masu kyau. Yana da kauri iri ɗaya kuma yana haifar da ɗanɗano kaɗan yayin aiki, ba tare da ƙazanta ba. Tabarmar tana da taushi kuma mai sauƙin yaga da hannu, kuma tana aiki da kyau a aikace tare da kyawawan abubuwan lalata kumfa. Yana buƙatar ƙarancin guduro amfani, jike da sauri, kuma yana shiga resins sosai. Lokacin da aka yi amfani da shi wajen kera manyan sassan yanki, yana ba da ƙarfi mai ƙarfi, kuma abubuwan da aka haifar suna alfahari da kyawawan kaddarorin inji.

Bayanan Fasaha

Lambar samfur	Nisa (mm)	Nauyin Raka'a (g/m2)	Ƙarfin Tensile (N/150mm)	Solubilize Speed a Styrene(s)	Abubuwan Danshi(%)	Daure
HMC-P	100-3200	70-1000	40-900	≤40	≤0.2	Foda
HMC-E	100-3200	70-1000	40-900	≤40	≤0.5	Emulsion

Ana iya samun buƙatu na musamman akan buƙata.

Marufi

● Diamita na ƙwanƙwasa igiyoyi na iya zama daga 28cm zuwa 60cm.

●Ana naɗe wannan nadi da ainihin takarda wanda ke da diamita na ciki na 76.2mm (3 inch) ko 101.6mm (inch 4).

●Kowanne nadi ana fara nannade shi a cikin jaka ko fim, bayan haka sai a sanya shi a cikin kwali.

● Za a iya jeri nadi ko dai a tsaye ko a kwance akan pallets.

Adana

● Sai dai in an bayyana ba haka ba, ya kamata a adana tabarmi da aka yanka a wuri mai sanyi, busasshiyar da ba ta da ruwa. Ana ba da shawarar cewa zafin jiki da zafi a cikin ɗakin ya kasance koyaushe a 5 ℃-35 ℃ da 35% -80% bi da bi.

● Nauyin naúrar Yankakken Strand Mat ya bambanta daga 70g-1000g/m2. Nisa na yi ya bambanta daga 100mm-3200mm.

Na baya: Fiberglass Yankakken Matsala: Dole ne-Dole ne don Injiniyoyi Haɗaɗɗen

Na gaba: Fiberglass Yankakken Matsala don Dorewa da Sakamako Mai Dorewa

Ku rubuta sakonku anan ku aiko mana