Customizable Continuous Filament Mat for Tailored Closed Molding Needs
FEATURES & BENEFITS
● Excellent resin infusion performance
● High wash resistance
● Good conformability
● Low-resistance unrolling, clean-cut performance, and operator-friendly handling
PRODUCT CHARACTERISTICS
| Product Code | Weight(g) | Max Width (cm) | Solubility in styrene | Bundle density(tex) | Solid content | Resin compatibility | Process |
| CFM985-225 | 225 | 260 | low | 25 | 5±2 | UP/VE/EP | Infusion/ RTM/ S-RIM |
| CFM985-300 | 300 | 260 | low | 25 | 5±2 | UP/VE/EP | Infusion/ RTM/ S-RIM |
| CFM985-450 | 450 | 260 | low | 25 | 5±2 | UP/VE/EP | Infusion/ RTM/ S-RIM |
| CFM985-600 | 600 | 260 | low | 25 | 5±2 | UP/VE/EP | Infusion/ RTM/ S-RIM |
● Other weights available upon request.
● Other widths available upon request.
PACKAGING
● Engineered cores offer 3" (76.2mm) or 4" (102mm) diameter configurations. A standardized 3mm wall thickness ensures optimal load-bearing capacity and resistance to deformation.
● Damage Prevention Protocol: Custom-fit protective film is applied to every shipped unit, actively defending against: environmental threats: Dust accumulation & moisture absorption ,physical hazards: Impact, abrasion, and compression damage throughout storage and transportation cycles.
● Full-Lifecycle Traceability: Unique barcode identifiers on all shipping units record manufacturing credentials (date/weight/roll count) and process variables. Supports ISO 9001-compliant material tracking from production through end-use.
STORAGING
● Recommended storage conditions: CFM should be kept in a cool, dry warehouse to maintain its integrity and performance characteristics.
● Optimal storage temperature range: 15℃ to 35℃ to prevent material degradation.
● Optimal storage humidity range: 35% to 75% to avoid excessive moisture absorption or dryness that may affect handling and application.
● Pallet stacking: It is recommended to stack pallets in a maximum of 2 layers to prevent deformation or compression damage.
● Pre-use conditioning: Before application, the mat should be conditioned in the worksite environment for at least 24 hours to achieve optimal processing performance.
● Partially used packages: If the contents of a packaging unit are partially consumed, the package should be properly resealed to maintain quality and prevent contamination or moisture absorption before the next usage.
